Brief Introduction
SP compact pressure transmitter combined with all the latest available technologies of the modern electronic pressure measurement fields. It’s the most cost-effective products after 10 year’s research and development. The sensor adopts full-automatic linear and temperature compensation technology to ensure the efficiency and quality of mass production. Fully-sealed and isolated air cavity design to ensure the long term reliability. Signal transmitting module adopts original calibration technology to realize parameters setting easily without any tools.
Advantage
• Excellent long-term stability, unique technological advantage to ensure the performance far exceeds the same price products.
• Powerful compact appearance, provide the highest cost-effective pressure measuring solutions.
• Pressure impact tests and time drift tests to ensure constant quality.
• Adopts patent pressure sensor technology, flexibly face all kinds of challenges of working conditions.
• Original calibration technology, realize parameters setting easily without any tools.
• Strong transient voltage resistance inside, easily cope with surge voltage.
Industry application
• Process control system
• Machine building
Technical Specifications |
||||
Pressure range |
Gauge Pressure: 0~0.1bar and 0~600bar |
|||
Overload pressure |
1.5×full scale |
|||
Accuracy |
0.25%F.S.,0.5 %F.S. |
|||
Power voltage |
12~30VDC, 24VDC |
|||
Output signals |
4~20mA, 0~10mA, 1~5VDC, 0~10VDC, 0~5VDC, customer |
|||
Thermal effect |
Compensated temperature |
Media |
Environment |
Storage |
0~50℃,-10~80℃, customer |
-60~200°C |
-30~85℃ |
-40~125℃ |
|
Temperature influence |
0.02%F.S./ °C |
|||
Electrical connection |
DIN, M12×1(4-pin), Terminals, customer |
|||
Protection class |
IP65 |
|||
Mechanical connection |
G1/2(M), G1/4(M), M20×1.5(M), customer |
|||
Vibration |
20g, 20~5000HZ |
|||
Shock |
100g, 11ms |
|||
Housing material |
SUS304, Aluminum alloy |
|||
Operating life |
﹥1×108 Pressure cycles |
Order sheet
SP pressure transmitter
Name |
Code |
Explanation |
SP |
|
Pressure Transmitter |
Process Connection Material |
1 |
Stainless Steel |
Process Connection Structure |
R |
external thread G1/2″ |
M |
external thread M20×1.5 |
|
Y |
Customize |
|
Sealing Material |
IF |
fluoro rubber(standard) |
IH |
fluoro rubber applied to Sensors(Over 10MPa) |
|
Electronic Components of Transmitters |
2 |
Analog signal 4-20mA (two wire) |
3 |
customize |
|
Shell material and structure |
A |
Aluminum shell PG16 cable sealingIP65 |
B |
Stainless steel shell cylinder structure |
|
Sensor Type |
0 |
Diffused Silicon Type |
1 |
Diffusion silicon anti-corrosion type |
|
Explosion-proof Requirements |
D |
No Explosion-proof Required |
E |
Explosion-proof type |
|
Accuracy |
2 |
0.2% |
5 |
0.5% |
anthony@auto-instruments.com
+86-535-2162110
No.3 Hengshan Road, ETDZ,Yantai,China
Remark:
.
SUBMIT
.